New products

This slim Hera door handle on a square rosette is made in anthracite gray. The rosette has cams, which keep it in place better. In addition, the rosette is equipped with a spring, so that the stool returns to its original horizontal position after use. You can combine this door handle with various products in anthracite gray. You can think of square rosettes with a keyhole, profile cylinder hole or with a toilet/bathroom lock. This creates a beautiful uniformity and sleek appearance of your door. Set of door handles on rosette|Fixing material for mounting

Read more less

This sliding door cup is specially intended for the DIY sliding door Cubo. The sliding door bowl is made of aluminum and has a black coating. This bowl has a size of 100 x 38 mm and is mounted on the profile of the DIY sliding door. Sliding door bowl|Fixing material for mounting

Read more less

This oval set of rear door fittings on a narrow shield consists of aluminum and is therefore lightweight and strong at the same time. The security fittings have a black coating. The product is SKG*** approved, which means that it is heavily burglar-resistant fittings. In addition, it is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with an outside stool and a matching inside stool and can be used on both the left and right. The security fitting is spring-loaded and has a profile cylinder hole size of 92 mm. Inner shield with door handle and profile cylinder hole|Outer shield with door handle and core pulling protection|Fixing material for installation|Extensive installation instructions|Including drilling template

Read more less

This oval set of front door fittings on a narrow shield consists of aluminum and is therefore lightweight and strong at the same time. The security fittings have a black coating. The product is SKG*** approved, which means that it is heavily burglar-resistant fittings. In addition, it is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a handle on the outside and a matching stool for the inside and can be used on both the left and right. The security fitting is spring-loaded and has a profile cylinder hole size of 92 mm. Inner shield with door handle and profile cylinder hole|Outer shield with front door handle and core pulling protection|Fixing material for installation|Extensive installation instructions|Including drilling template

Read more less

Door handle Ben is made of nickel and subsequently brushed, giving it a matte appearance. This door handle on a square rosette is supplied in pairs. Set of door handles|Fixing material for installation

Read more less

The front door fittings on an oval shield are made of zamak and subsequently brushed and nickel-plated, giving it a matte appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a handle on the outside and a matching handle for the inside of the door and can be used on both the left and right. The front door fitting has a profile cylinder hole size of 92 mm. This product is supplied per set including mounting materials for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with handle and core pulling protection|Fixing material for mounting

Read more less

The front door fittings on an oval shield are made of zamak and subsequently brushed and nickel-plated, giving it a matte appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a handle on the outside and a matching handle for the inside of the door and can be used on both the left and right. The front door fitting has a profile cylinder hole size of 72 mm. This product is supplied per set including mounting materials for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with handle and core pulling protection|Fixing material for mounting

Read more less

The front door fittings on an oval shield are made of zamak and subsequently polished and chrome-plated, giving it a shiny appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a handle on the outside and a matching handle for the inside of the door and can be used on both the left and right. The front door fitting has a profile cylinder hole size of 92 mm. This product is supplied per set including mounting materials for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with handle and core pulling protection|Fixing material for mounting

Read more less

The front door fittings on an oval shield are made of zamak and subsequently polished and chrome-plated, giving it a shiny appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a handle on the outside and a matching handle for the inside of the door and can be used on both the left and right. The front door fitting has a profile cylinder hole size of 72 mm. This product is supplied per set including mounting materials for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with handle and core pulling protection|Fixing material for mounting

Read more less

With this Dudok window stay you can easily ventilate your home. This window stay is made of brass and subsequently tumbled, giving it a dull and dark appearance. This window stay is intended for outward opening windows and is equipped with adjustment pins, allowing you to easily determine the ventilation position. Window stay | Adjustable pin | Fastening material for mounting

Read more less

This stainless steel window handle in L-model has been brushed afterwards, giving it a matte appearance. Due to the use of stainless steel, this window handle has a long lifespan. This window handle is supplied individually including an oval rosette and is specially intended for tilt-and-turn or case-turn windows and doors with a side espagnolette. Window handle on rosette|Fixing material for mounting

Read more less

Helena front door fitting on a rectangular shield is made of zamak and subsequently brushed and nickel-plated, giving it a matte appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a knob on the outside and a matching handle for the inside of the door, has a profile cylinder hole size of 92 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door knob and core pulling protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena front door fitting on a rectangular shield is made of zamak and subsequently brushed and nickel-plated, giving it a matte appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a knob on the outside and a matching handle for the inside of the door, has a profile cylinder hole size of 72 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door knob and core pulling protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena back door fitting on a rectangular shield is made of zamak and subsequently brushed and nickel-plated, giving it a matte appearance. The rear door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a door handle on both the inside and outside, has a profile cylinder hole size of 92 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door handle and core pull protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena back door fitting on a rectangular shield is made of zamak and subsequently brushed and nickel-plated, giving it a matte appearance. The rear door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a door handle on both the inside and outside, has a profile cylinder hole size of 72 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door handle and core pull protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena front door fitting on a rectangular shield is made of zamak and subsequently polished and chrome-plated, giving it a shiny appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a knob on the outside and a matching handle for the inside of the door, has a profile cylinder hole size of 92 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door knob and core pulling protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena front door fitting on a rectangular shield is made of zamak and subsequently polished and chrome-plated, giving it a shiny appearance. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a knob on the outside and a matching handle for the inside of the door, has a profile cylinder hole size of 72 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door knob and core pulling protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena rear door fitting on a rectangular shield is made of zamak and subsequently polished and chrome-plated, giving it a shiny appearance. The rear door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a door handle on both the inside and outside, has a profile cylinder hole size of 92 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door handle and core pull protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena rear door fitting on a rectangular shield is made of zamak and subsequently polished and chrome-plated, giving it a shiny appearance. The rear door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a door handle on both the inside and outside, has a profile cylinder hole size of 72 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door handle and core pull protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena front door fitting on a rectangular shield is made of zamak and has a brass-colored PVD coating. This special treatment gives the finish of exceptional quality and makes the product less sensitive to corrosion. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a knob on the outside and a matching handle for the inside of the door, has a profile cylinder hole size of 92 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door knob and core pulling protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena front door fitting on a rectangular shield is made of zamak and has a brass-colored PVD coating. This special treatment gives the finish of exceptional quality and makes the product less sensitive to corrosion. The front door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a knob on the outside and a matching handle for the inside of the door, has a profile cylinder hole size of 72 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door knob and core pulling protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena back door fitting on a rectangular shield is made of zamak and has a brass-colored PVD coating. This special treatment gives the finish of exceptional quality and makes the product less sensitive to corrosion. The rear door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a door handle on both the inside and outside, has a profile cylinder hole size of 92 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door handle and core pull protection|Fixing material for installation|Extensive installation instructions

Read more less

Helena back door fitting on a rectangular shield is made of zamak and has a brass-colored PVD coating. This special treatment gives the finish of exceptional quality and makes the product less sensitive to corrosion. The rear door fitting is equipped with core pulling protection, which protects the cylinder against pulling out and drilling out the cylinder core. This set is equipped with a door handle on both the inside and outside, has a profile cylinder hole size of 72 mm and can be used on both the left and right. The shield is also provided with lugs, which keep it better in place. In addition, the shield is spring-loaded so that the door handle springs back to its horizontal position after use and is suitable for a handle-operated multi-point lock. This set is supplied including mounting material for mounting. Inner shield with door handle and profile cylinder hole|Outer shield with door handle and core pull protection|Fixing material for installation|Extensive installation instructions

Read more less

The DIY sliding door Cubo is a combination of a stylish black door with a sleek sliding door system. The door consists of an aluminum black profile and four glass panels, which you can easily assemble. The sliding door is 235 cm high, 98 cm wide and has a thickness of 2.8 cm. The tempered frosted glass is 6 mm thick. This complete DIY set is supplied including door handle and Basic Top sliding door system. This steel suspension system with black powder coating consists of two rails of 100 cm. In addition, this set consists of two straight hanging rollers with a length of 13 cm, suitable for mounting on top of the door. To ensure proper guidance of the sliding door, door stops, spacers and a floor guide are included. This complete set is offered including mounting materials and extensive installation instructions. Seven black profiles | Four matte glass panels | Black nylon strips | Door handle | Two steel rails | Two hanging rollers | Two steel door stops | Spacers for the door | Sliding door floor guide | Fastening material

Read more less